How To Clean A Toilet Tank?
This is an important task to clean a toilet tank. There are many minerals and bacteria build up along with dirt on the inside part of the tank that can also create unpleasant odours of your toilet.
Nowadays maximum home toilets involve a tank that works as a reservoir for fresh water and which is used to flush out the toilet bowl. Relying on the efficiency of the water in your field, the interior of the tank can increase mineral deposits that can interfere or damage the operation of the components.
In humid and hot places the tank can improve the raise of mildew and mould particularly if your toilet is not flushed mostly imposing the tank to refill with the freshwater.
Luckily, cleaning the toilet tank is not the hardest and can be accomplished with products you possibly have in your storeroom.
How Frequently Need To Clean The Toilet Tank
Typically, every toilet tank must be cleaned twice a year. This is an excellent idea to clean your toilet tank quarterly to maintain the flush valves in proper working order if you are taking up water from a well in a place with hard water.
Cleaning your toilet tank will also assist decrease hard water and rust stains in your toilet bowl at the same time freshen the air in the bathroom.
Needed tools and materials:
- Sponge
- Long-handled scrub brush
- Rubber gloves (if necessary)
- Distilled white vinegar
- Disinfectant cleaner
1. Place The Water Valve
The tank needs to be cleared of water and it is so easy if you apply the water control valve to hold the water flow.
To locate the water valve that is normally on the wall back of the tank or close to the base of the toilet. Turn the valve clockwise to stop the water flow.
2. Evacuate The Tank
Take aside the lid from the tank and set it out the way. And flush your toilet until the tank drains properly. It may require two or three flushes relying on the size and shape of the reservoir to empty the tank.
Suggestion: As you will necessary to flush the toilet different times to clear the tank, so cleaning the toilet bowl is also an important matter.
3. Measure The Tank
If your toilet tank is fully new or you are using great water in your area, you may just require to allow the tank a proper scrubbing by the disinfectant cleaner.
And, if you notice a rusty spot in the bottom of your tank, then the tank will necessary a deeper cleaning work with vinegar.
Tip: You should not clean your tank with full-strength chlorine bleach or fill the tank using chlorine bleach. Because this bleach can often damage the internal components and abstract the flapper valves.
4. Use A Disinfectant Cleaner
Using a disinfectant cleaner you can just spray the inner of the tank floor and walls while a foaming bathroom cleaner performs very well and fastening. You should get around spraying the cleaner on any type of metal component to avoid corrosion. Put on the cleaner to act for a minimum of 10 minutes earlier scrub it away.
Don’t use an existent toilet bowl brush only with a long-handled scrub brush scrubbing away the rubbish and grime. Make sure for cleaning to reach into corners and the actual bottom of the tank.
To clean the overall working parts of your toilet you can use a dampened sponge with a little disinfectant cleaner.
Now wipe the flapper, ball float, refill tube, handle chain or bar and other components. Turn your water valve behind and accommodate the tank to refill. And flush one or two times to set free the loosened soil or cleaner.
5. For Deep Cleaning Use Distilled White Vinegar
The distilled white vinegar can able to breakdown minerals smoothly so that you can scrub them away. Clear the tank of water, alleviate the top, and now fill it with some distilled white vinegar. Assume the vinegar to sit in the tank for about 12 hours.
In the time of soaking, empty your toilet tank by flushing away the vinegar. Again by a long-handled brush with the disinfectant cleaner scrub away the loosened filth. Now clean the functional components with a sponge and a little disinfectant bathroom cleaner. After that time turn on the water control valve and then fill the tank with water for flushing several stains away.
Suggestion: When your tank is vacant of water, which is the better opportunity to test all of the functional components of the toilet. And if you think your toilet has not been flushing properly, a few parts are required to be replaced, most frequently the flapper.
Summary
Finally, a toilet tank is one of the most essential things which must need to clean appropriately.
Especially to avoid various mould and mildew, many stains that can damage all of the toilet components, cleaning the toilet tank is really necessary.
